Filter
Top Products
44 C1696M (8/06)
Activating Auxiliary Commands (Wiper)
On cameras that are equipped with a wiper, a preset command is available to activate it from the DVR5100. The DVR5100 ignores the command
if a camera does not support it.
NOTE: The instructions in this manual refer to the DVR5100 Control Pad. Refer to Navigating Through Menus with the KBD5000 Keyboard on
page 4 and Navigating Through Menus with a PC Keyboard and Mouse on page 6 for alternate keystrokes if you are using either of these devices.
To activate the wiper command:
1. While in live view mode, select a video pane that is displaying video from a camera with a wiper. The video pane border is green.
2. From the main menu, select Actions, and then press Enter/Shift . The Action menu appears.
Figure 53. Scripts Menu
3. Select Auxiliary, and then press Enter/Shift .
4. Repeat the command as often as necessary. The command is ignored on cameras that do not have a wiper.