Filter
Top Products
46 C1696M (8/06)
PERFORMING A QUICK SEARCH
NOTE: The instructions in this manual refer to the DVR5100 Control Pad. Refer to Navigating Through Menus with the KBD5000 Keyboard on
page 4 and Navigating Through Menus with a PC Keyboard and Mouse on page 6 for alternate keystrokes if you are using either of these devices.
To perform a quick search for and play back video:
1. In the live view mode, select a video pane that is displaying video from a camera. The video pane border is green.
2. From the main menu, select Search/Export. The Search/Export menu appears.
Figure 55. Quick Search Menu
3. Select Quick Search, and then press Enter/Shift , The Quick Search dialog box appears (Figure 54).
4. Turn the jog (inner dial) to select the starting time along the timeline. To change the timeline display, turn the shuttle (outer dial) to zoom in
and out on the timeline. Units of time increase or decrease between months and days, days and hours, hours and minutes, or minutes and
seconds.
5. Do the following:
• To play video and keep the Quick Search dialog open, navigate to the Play icon , and then press Enter/Shift .
• To play video and close the Quick Search dialog, navigate to the OK icon , and then press Enter/Shift .
• To close the Quick Search dialog, navigate to the Cancel icon , and then press Enter/Shift .
For information about locking video from the Quick Search dialog box, refer to Locking and Unlocking a Video Clip on page 52.