Filter
Top Products
C1696M (8/06) 33
3. Move the joystick left or right to pan to the left or right of the current scene.
4. Move the joystick up or down to tilt the camera up or down from the current scene.
5. Press and hold the Plus or Minus buttons to zoom in and zoom out of the scene.
If the camera does not respond to the joystick, verify that the camera protocol is configured correctly. The DVR5100 supports Coaxitron, Extended
Coaxitron, Pelco D and Pelco P protocols for cameras that are equipped for PTZ control.
ACCESSING CAMERA MENUS
Many settings for different cameras can be programmed to fit your specific needs. For example, the Spectra III
TM
Series camera provides menus
from which you can adjust language settings, motion sensing, create patterns and presets, and other settings directly from the DVR5100. You can
display menus and adjust camera settings from the DVR5100 if your user role has permissions to do so.
NOTE: The instructions in this manual refer to the DVR5100 Control Pad. Refer to Navigating Through Menus with the KBD5000 Keyboard on
page 4 and Navigating Through Menus with a PC Keyboard and Mouse on page 6 for alternate keystrokes if you are using either of these devices.
To access a camera menu:
1. In the live view mode, select a video pane that is displaying a camera for which you want to view its on-screen menu. Refer to Viewing a
Specific Camera on page 27.
The border of the video pane will be green. If the border is blue, you cannot access the camera menu. Press Enter/Shift to change the
mode from PTZ mode to live view mode.
2. Press Menu . A DVR5100 menu appears.
Figure 37. Selecting the Camera Menu
3. Navigate to the Cameras menu from the main menu, and then select the Camera Menu icon. The settings menu for the camera appears.
The list of options varies for each camera type. For example, the Figure 38 shows the main menu from a Spectra III Series camera.
Figure 38. Example of a Camera Settings Menu
WARNING: Among the available menu options are commands to restart or turn off a camera. Restarting or turning off a camera stops any
video recording that might be in progress for the camera. Check with your system administrator before you restart or turn off a camera that
might be in use by other users on the system.
MAIN MENU
<LANGUAGE>
<CAMERA>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>
<CLEAR>
<PASSWORD>
BACK
EXIT