Filter
Top Products
24 Pelco Manual C681M-D (2/02)
ALARM RECORDING DURATION
Skip steps 1 and 2 if they have already been done.
1. Press the SET UP button to display the Menu Setting menu.
2. Turn the JOG dial to move the cursor to A-REC/M-DET SETTING, and then turn the
SHUTTLE ring to the right. The A-Rec/M-Det Setting menu appears.
3. Turn the JOG dial to move the cursor to A-REC DURATION, and then turn the
SHUTTLE ring to the right. The option starts flashing.
NOTE:
If the PRE A-REC field in this menu has been set to SHORT, MEDIUM,
or LONG, the option does not flash because it cannot be changed.
4. Turn the JOG dial to select the option, and then turn the SHUTTLE ring to the right.
The option stops flashing.
Turning the JOG dial switches the alarm record duration options as follows:
DX3009 Models – MAN, 15S, 30S, 45S, 1M, 2M, 5M, 10M
DX3016 Models – MAN, 2S, 5S, 10S, 15S, 30S, 45S, 1M, 2M, 5M, 10M
MAN: Alarm recording continues until the ALARM IN terminal is cleared.
NOTE:
MAN cannot be selected when the Motion Detection setting in the Initial
Set Up menu is ON. If MAN is selected and then the motion detection setting is
turned on, MAN is automatically changed to 15S on DX3009 models and 2S on
DX3016 models.
5. Do one of the following:
•Turn the JOG dial to go to another item in this menu.
•Turn the SHUTTLE ring to the left to return to the Menu Setting menu to go to an-
other menu.
• Press the SET UP button to exit the programming mode.
RECORD ALARM
This setting determines which cameras to record when an ALARM IN terminal is grounded.
This setting is only effective during alarm recording. After alarm recording, operations return
to their prior settings.
Skip steps 1 and 2 if they have already been done.
1. Press the SET UP button to display the Menu Setting menu.
2. Turn the JOG dial to move the cursor to A-REC/M-DET SETTING, and then turn the
SHUTTLE ring to the right. The A-Rec/M-Det Setting menu appears.
3. Turn the JOG dial to move the cursor to RECORD ALARM, and then turn the
SHUTTLE ring to the right. The option starts flashing.
NOTE:
If the PRE A-REC field in this menu has been set to SHORT, MEDIUM,
or LONG, the option does not flash because it cannot be changed.