Filter
Top Products
C626M-C (5/06) 119
Linking Relay Outputs to Video Loss Events
To set relay outputs to activate in response to a video loss event:
1. On the DX8000 toolbar, click . The Setup dialog box opens to the Camera page.
2. Click .
3. Click the Event-Relay Link Settings tab.
4. In the Video-Loss Link Settings section, do the following:
a. Select a camera from the Video-Loss Channel drop-down box.
b. Click the button for each relay you want to link to the selected Video-Loss Channel.
5. Click Apply.
Figure 92. Event-Relay Link Settings: Video-Loss Link Settings Section
LINKING CAMERAS TO RECORD IN RESPONSE TO EXTERNAL EVENTS
Multiple cameras can be configured to begin recording in response to detected motion, alarm, ATM/POS transaction, and video loss events.
This section describes how to link cameras to record in response to these events and includes the following topics:
• Linking Cameras to Record in Response to Motion Events on page 138
• Linking Cameras to Record in Response to Alarm Events on page 138
• Linking Cameras to Record in Response to ATM/POS Events on page 139
• Linking Cameras to Record in Response to Video Loss Events on page 139
4
b
4a