Pelco DX8000 DVR User Manual


 
C626M-C (5/06) 69
PLAYING BACK VIDEO BY TIME
This section describes how to play back video by time. The time is displayed in 24-hour clock format. You can select the time by moving the slider
along the timeline.
This section includes the following topics:
Starting Playback from a Specific Point in Time on page 83
Understanding Instant Playback on page 83
STARTING PLAYBACK FROM A SPECIFIC POINT IN TIME
To start video playback from a particular point in time:
1. On the DX8000 toolbar, click .
2. Select a camera by clicking it in the Site tree. You can also select the camera from a view pane if the camera appears in the panel.
3. In the Timeline section, do the following:
a. In the Date Selection drop-down box, select the day that you want playback to begin.
b. Use the spinner buttons to select the time.
4. Click to begin viewing.
Figure 53. Date Selection Drop-down Box
UNDERSTANDING INSTANT PLAYBACK
The DX8000’s ability to perform instant playback of video is limited by a one-minute delay interval. The DX8000 has a built-in latency of
approximately one minute between the time that video is captured and when it is written to the hard disk. This delay exists to ensure that video
is accurately stored and that the DVR’s database is updated correctly.
The delay interval is not affected if the DX8000 is in the alarm or motion record mode. In this case, the pre-alarm or pre-motion time period does
not become a factor in determining the delay interval.
To initiate an instant playback:
The user has the ability to view video that is just recorded. This video image resides in memory and has not yet been stored on the hard drive.
The color of the timeline will be green. This is because the system cannot tell what the data characteristic is while the data resides in memory
For example, if this data is recorded from a camera configured to monitor motion, and there is no motion activity, the data will not be stored on
the hard disk drive.
On the playback control, click Instant Playback. The timeline is zoomed to the last two to three minutes of data.