Filter
Top Products
C626M-C (5/06) 97
Clearing All Bookmarks
To clear all bookmarks:
INSERTING AND REMOVING A USB FLASH DRIVE
The DX8000 supports both USB 1.1 and USB 2.0 flash drives. To ensure data is not lost or corrupted when exporting data to a USB flash drive,
follow the steps listed in
Removing a USB Flash Drive on page 115.
This section describes how to insert and remove a USB device and includes the following topics:
• Installing a USB Flash Drive on page 115
• Removing a USB Flash Drive on page 115
INSTALLING A USB FLASH DRIVE
This section describes how to install a USB flash drive. To install a USB flash drive into the PC:
1. Insert the USB drive into the PC’s USB 2.0 port.
2. Wait five seconds while the PC recognizes and automatically installs the device.
REMOVING A USB FLASH DRIVE
You can remove a USB device within the DX8000 environment. In this case, you do not have to exit to the Windows environment.
To remove the USB flash drive from the PC, follow the Windows instructions applicable for your machine. For example, for Windows XP:
1. Click the Safely Remove Hardware icon in the task bar. The system display a message to safely remove the USB device.
2. Click the Safely remove USB Mass Storage Device - Drive(G:) box. The system displays a confirmation message.
3. Remove the USB flash drive.
ENABLING THE DEINTERLACING FILTER
Images recorded at 4CIF at a low frame rate per second might move or tear. The DX8000 provides a global option for enabling deinterlacing
filtering to enhance the exported image for 4CIF recorded channels. In this case, the exported image is converted to 2CIF resolution. This setting
is effective for all channels, and cannot be set for enabling individual channels. For more information about the viewing video in the deinterlaced
mode, refer to Viewing Video in the Deinterlaced Mode on page 112.
To enable the deinterlacing filter:
1. Make sure the DVR is in Playback or Search mode by clicking or .
2. Click if you are in Live mode, or proceed to step 3 if you are in Search mode.
3. Click . The Export Video dialog box opens.
4. From the Export Format area, select the “Enable deinterlacing filter” check box.
.
Figure 75. Enabling the Deinterfacing Filter from the Export Video Dialog Box
Click Remove All Bookmarks.
WARNING:Improperly removing a USB drive can cause data to be lost or corrupted.