Pelco es30-isap TV Mount User Manual


 
C312M-A (12/02) 23
SCAN SPEED
The scan speed is adjustable from 1-40 degrees per second. This occurs in three scan modes: auto, random, and frame scan.
To change the scan speed:
1. Program preset 95 (28). The main menu appears.
2. Position the cursor (>) beside Other.
3. Press the Iris Open button to enter the menu entitled Other.
4. Position the cursor (>) beside Scan Speed deg/s.
5. Press the Iris Open button. The cursor moves to the right, beside the number of degrees.
6. Move the joystick up or down to toggle through the number of degrees (1-40) until you reach the number you want. (If set on a low
number, the scan will appear to barely move but is still functioning.)
7. SELECT – Press the Iris Open button on your keyboard to select your choice.
CANCEL – Press the Iris Close button if you do not want to change the setting.
Main Menu
<Camera>
<Line Sync>
<Power Up Mode>
<Limit Stop>
<Other>
EXIT
Other Menu
Proportional pan On
Park time minutes 0
Scan speed deg/s 25
Pattern length 1.5 min
Spd Profile
90 MPH wind
<Zone Blank>
Exit
SPEED PROFILE
This feature allows the operator to set the wind speed conditions for the location of the Esprit system. You can set two wind speed
profiles of 50 mph or 90 mph in which the system will remain operational. In both settings, the pan speed will be a maximum of 40
degrees per second. The difference will be in the turbo and preset pan speeds. The turbo and preset pan speeds are 100 degrees per
second in the 50 mph wind profile setting and 50 degrees per second in the 90 mph profile.
To set the speed profile:
1. Program preset 95 (28). The main menu appears.
2. Position the cursor (>) beside Other.
3. Press the Iris Open button to enter the menu entitled Other.
4. Position the cursor (>) beside Spd Profile.
5. Press the Iris Open button. The cursor moves to the right, beside the wind speed (50 mph wind or 90 mph wind).
6. Move the joystick up or down to toggle between the wind speeds (50 mph wind or 90 mph wind).
7. SELECT – Press the Iris Open button on your keyboard to select your choice.
CANCEL – Press the Iris Close button if you do not want to change the setting.
Main Menu
<Camera>
<Line Sync>
<Power Up Mode>
<Limit Stop>
<Other>
EXIT
Other Menu
Proportional pan On
Park time minutes 0
Scan speed deg/s 25
Pattern length 1.5 min
Spd Profile
90 MPH wind
<Zone Blank>
Exit