Filter
Top Products
30 C312M-A (12/02)
SPECIFICATIONS (PAN AND TILT SYSTEM ONLY)
ELECTRICAL
Input Voltage: 24, 120, or 230 VAC, 50/60 Hz; switch selectable for 120/230 VAC inputs
Output Voltage for POD100: 12 VDC (±10%), with POD100 installed
Power Consumption: Maximum 50 VA per system
Electrical Connections: Two power source connections made at mount location with wire splices and one ground wire splice; one
BNC receptacle and four wire splices at mount location for output of RS-422 D and P protocols
Video Coaxial Cable
Max. Wiring Distances: Cable Type* Maximum Distance
RG59/U 750 ft (229 m)
RG6/U 1,000 ft (305 m)
RG11/U 1,500 ft (457 m)
* Minimum cable requirements:
75 ohms impedance
All-copper center conductor
All-copper braided shield with 95% braid coverage.
MECHANICAL
Pan Movement: 360° continuous pan rotation
Vertical Tilt: Unobstructed +33° to -83°
Variable Pan/Tilt Speed
Pan: 0.5° to 40°/sec variable-speed operation, 100°/sec turbo
Tilt: 0.5° to 20°/sec variable-speed operation
Preset Speeds
Pan: 100°/sec
Tilt: 30°/sec
GENERAL
Construction: Die-cast, extruded and sheet aluminum; stainless steel hardware
Finish: Gray polyester powder coat
Operating Temperature: -50° to 122°F (-45° to 50°C) for sustained pan and tilt system operation or 140°F (60°C) absolute maximum
Operating Environment: Will remain operational in 90 mph wind conditions; withstands 130 mph
Weight (approx.)
With Pedestal Adapter 14 lb (6.35 kg)
With Wall Mount 16 lb (7.26 kg)