10 C1680M (1/06)
Installation
PACKAGE CONTENTS
The following items are supplied:
1 FT8301A transmitter with attached left and right wall-mounting brackets
1 Regulated switching power supply with four plug adapters (North American, Australian, U.K.,
and European configurations); 100-240 VAC, 50-60 Hz input, 12 VDC output
1 BNC-to-BNC RG179/U coaxial cable
1 EH2500 Series accessory kit, which contains the following:
1 EH2500 bracket
2 4-40 x 0.187-inch Phillips flat head screws
1 10-32 x 0.375-inch Phillips pan head screw and lock washer
The EH2500 Series accessory kit must be used when installing the FT8301A transmitter into an
EH2515 Series enclosure.
1 EH3500 Series accessory kit, which contains the following:
2 EH3500 brackets (one left, one right)
4 4-40 x 0.25-inch Phillips pan head screws and lock washers
1 Replacement gland
1 Rubber plug
The EH3500 Series accessory kit must be used when installing the FT8301A transmitter into an
EH3512/EH3515 Series enclosure.
1 DF5/DF8 Series accessory kit, which contains the following:
1 DF5/DF8 bracket
4 4-40 x 0.187-inch Phillips flat head screws
The DF5/DF8 Series accessory kit must be used when installing the FT8301A transmitter into a
DF5/DF8 fixed mount dome.
1 FT8301A Miniature Fiber Transmitter Installation manual (this manual)