Filter
Top Products
C1680M (1/06) 9
FRONT PANEL
The front panel of the FT8301A transmitter provides connectors and LED indicators (refer to Figure 2).
Figure 2. Front Panel of FT8301A Transmitter—Multimode and Single-Mode Models
NOTE: The FT8301A transmitter provides two video input connectors: one UTP connector and one
BNC connector. Only one of the connectors can be used at one time.
For additional information about front-panel connections, refer to the Installation section. For
additional information about the front-panel indicators, refer to the Troubleshooting section.
ᕡ POWER CONNECTOR, 2-pin connector; removable mating connector with screw terminals (not
shown)
ᕢ VIDEO IN UTP (UNSHIELDED TWISTED PAIR) CONNECTOR, 100-ohm differential analog video
input; 2-pin connector; removable mating connector with spring-cage terminals (not shown)
ᕣ
VIDEO IN BNC CONNECTOR, 75-ohm analog video input
ᕤ
OPTIC FAULT LED, laser status indicator
ᕥ
VIDEO PRESENT LED, video signal status indicator
ᕦ FIBER OPTIC CONNECTOR, ST (multimode and single-mode models) or FC (single-mode models
only)
MULTIMODE
MODELS
SINGLE-MODE
MODELS
ᕡ ᕢ ᕣ
ᕤ
ᕥ
ᕦ
ᕡ ᕢ ᕣ
ᕤ
ᕥ
ᕦ