Filter
Top Products
30 C1680M (1/06)
9. Connect the transmitter as follows:
a. Connect power to the transmitter.
b. Route the fiber optic cable around the inside of the back box toward the transmitter and
connect the cable to the fiber optic connector on the transmitter.
WARNING: When routing the fiber optic cable, be careful not to bend the fiber
at a sharp angle. Doing so breaks the fiber.
c. Using the coaxial cable supplied with the transmitter, connect the cable to the BNC
connector on the transmitter and on the camera.
10. Reconnect power to the camera.
11. Reattach the lower dome to the back box.
12. Reconnect power to the DF5/DF8 dome.