Filter
Top Products
20 C1680M (1/06)
Figure 10. Removing EH3512/EH3515 Enclosure Accessories
10. Mount the transmitter into the enclosure by doing the following (refer to Figure 11):
a. Position the transmitter at the rear of the enclosure with the connectors facing the
camera.
b. Attach the transmitter to the enclosure by tightening the 6-32 captive screw on the left-
and right-mounting EH3500 brackets.
* DISCARD SELF-TAPPING SCREWS.
REAR HEATER BRACKET
(2) SCREWS, 6-32 X 1.5-INCH,
PHILLIPS, PAN HEAD
WITH LOCK WASHER
SELF-TAPPING SCREW*
BLOWER
HEATER
PC BOARD COVER
COVER BRACKET
SELF-TAPPING SCREW*
PC BOARD
(4) NYLON WASHERS