Filter
Top Products
24 C1680M (1/06)
MOUNTING THE TRANSMITTER INTO A DF5/DF8 DOME
The FT8301A transmitter can be mounted into DF5 and DF8 in-ceiling and pendant fixed mount domes.
The following sections provide information about the following:
• Mounting the DF5/DF8 bracket to the transmitter
• Mounting the transmitter into a DF5/DF8 in-ceiling dome
• Mounting the transmitter into a DF5/DF8 pendant dome
Mounting the DF5/DF8 Bracket to the Transmitter
The DF5/DF8 accessory kit, which is supplied with the transmitter, contains the DF5/DF8 bracket and
associated screws. The DF5/DF8 bracket must be mounted to the transmitter before the transmitter
is mounted into a DF5/DF8 fixed mount dome.
To mount the DF5/DF8 bracket to the transmitter, do the following:
1. Using a small Phillips screwdriver, remove the left and right wall-mounting brackets that are
attached to the transmitter by loosening the four 4-40 x 0.25-inch Phillips pan head screws
(two screws each side).
2. Using the four 4-40 x 0.187-inch Phillips flat head screws and DF5/DF8 bracket supplied in the
DF5/DF8 accessory kit, attach the bracket to the transmitter (refer to Figure 15).
Figure 15. Attaching DF5/DF8 Bracket to FT8301A Transmitter
DF5/DF8
BRACKET
(4) SCREWS, 4-40 X 0.187-INCH,
PHILLIPS, FLAT HEAD