Filter
Top Products
36 Pelco Manual C673M (2/01)
UNLOADING
1. Press the EJECT button on the front of the VCR.
Even in standby mode the VCR will eject a video cassette. When you press EJECT,
the VCR automatically turns on, ejects the tape, and turns off.
You cannot eject a tape while recording without first pressing the STOP button, or
while all the VCR’s buttons are locked.
2. Remove the cassette.
PREVENTING ACCIDENTAL ERASURE
Video cassettes come with an erasure prevention tab. Removing it stops the tape’s
contents from being erased or recorded over. The VCR automatically ejects a cassette if
you try to record over it with the erasure prevention tab removed.
DAMAGED CASSETTE TAPE
We recommend taking any torn or broken cassette tape requiring repair only to profession-
als who specialize in such procedures. The adhesives on many common types of tape
could damage the heads on the VCR.
WHEN TO REPLACE A TAPE
We recommend you replace the tape cassette with a new one according to the mode in
which it is used. Refer to Table C.
Table C. Tape Replacement by Use
T-120 T-160
Recording Time Number of Tape Recording Time Number of Tape
Mode Uses Mode Uses
6H 100 8H 50
L18H 60 L24H 30
L30H 25 L40H 10
48H 20 64H 5
72H 15 96H 3
120H 15 128H 3
168H 10 160H 2
0H 8 224H 1
10H1
00460
ERASURE
PREVENTION
TAB