Philips 26PFL4907 CRT Television User Manual


  Open as PDF
of 67
 
English
16
Watchingchannelsfromanexternaldevice
Switching Each Input Mode can easily switch with the remote control
between TV (DTV or Analog TV) and external devices when they are
connected to the unit.
1 Turn On a set-top box or the connected device.
• The picture from your set-top box or the connected device
might appear automatically on the TV screen.
If the picture does not appear
Press SOURCE repeatedly to select the set-top box or the
connected device and wait a few seconds till the picture appears.
e.g.)
TV
HDMI1
HDMI2
HDMI3
Video
PC
11.1 HDMI1 HDMI2
DTV/TVchannel
Video
or
Component
PC HDMI3
• Pressing ▲ reverses the direction of the Input modes.
2 Use the remote control of the set-top box or the connected device
to select channels.
AccesstheHomemenu
1 Press MENU/E�IT.
GuidetoHomemenu
WatchTV BrowseUSB BrowsePC
NetTV Addnewdevices Setup
a
b
c
d
e
f
a Watch TV :
Switches back to the antenna source if
another source is selected.
b Net TV :
Accesses Net TV menus.
c Add new devices :
Adds new devices to the Home menu.
d Browse USB :
Accesses USB menus.
e Browse PC :
Accesses DLNA menus.
f Setup :
Accesses menus that allow you to
change picture, sound and other TV
settings.
Note
• After selecting Addnewdevices, follow the on-screen instructions to select the correct
device and connector.
LockorunlockyourdevicefromtheHomemenu
This section describes how to lock or unlock specied device.
1 Press MENU/E�IT on the remote control.
2 Use ▲▼◄► to select a device to lock or unlock.
3 Press OPTIONS on the remote control.
4 Use
▲▼ to select Devicelock or Deviceunlock, then press OK.
• If device lock is unlocked, Devicelock will be displayed. If device
lock is locked, Deviceunlock will be displayed and will be
displayed at the top right of the device icons.
5 Enter your PIN. ChangePIN
➠
p.36
• Once you have set PIN, PIN input menu does not appear after
the unit is Turned on.
EnableordisableRCkeyforwardingfromtheHome
menu
This section describes how to enable or disable RC key forwarding for
a particular device.
1 Press MENU/E�IT on the remote control.
2 Use ▲▼◄► to select a device to enable or disable RC key
forwarding.
3 Press OPTIONS on the remote control.
4 Use ▲▼ to select EnableRCkeyforwarding or
DisableRCkeyforwarding, then press OK.
• If RC key forwarding is set to off, EnableRCkeyforwarding
will be displayed. If RC key forwarding is set to on,
DisableRCkeyforwarding will be displayed and will be
displayed at the top left of the device icons.
Note
• This function is available only when your devices are connected to this unit
through HDMI cables and assigned to an HDMI port (HDMI 1 to HDMI 3) with
Addnewdevices in the Home menu.
 previous next