Philips 26PFL4907 CRT Television User Manual


 
English
46
HDMI-ARCconnection
HDMI-ARC allows you to use EasyLink to output TV Audio directly to
a connected Audio device, without the need for an additional Digital
Audio cable.
OUT
HDMI-ARC
Digitalhometheater
amplier
HDMIcable
HDMI1INonly
Note
The HDMI 1 connector is HDMI Audio Return Channel (ARC) compliant. Use it to
output Digital Audio to an HDMI home theater system.
Be sure that the device is HDMI CEC and ARC compliant and that the TV is connected
to the device using an HDMI cable attached to HDMI-ARC connectors.
ComponentAnalogVideoConnection
Component Analog Video connection offers better picture quality for
video devices connected to the unit.
If you connect to the unit’s Component Video (Y/Pb/Pr) Input jacks,
connect Analog Audio cables to the Analog Audio (L/R) Input jacks.
OUTOUT
IN
IN
IN
IN
OUT
OUT
Component(Y/Pb/Pr)Videocables
Audio(L/R)cables
set-topbox
or
Blu-raydisc/DVD
recorder
Note
The unit accepts 480i / 480p / 720p and 1080i/p of video signals for this connection.
CompositeAnalogVideoConnection
Composite Analog Video connection offers standard picture quality for
video devices connected to the unit.
If you connect to the unit’s Composite Video (Y/VIDEO) Input jack,
connect Audio cables to the Audio (L/R) Input jacks. When the Audio is
monaural, then only connect to the Audio L Input jack.
OUTOUT
IN
IN
DVDplayer
Audio(L/R)+Videocables
Note
With this unit, Yellow cable must be connected to Y (Green) of Component Video Input
jacks.
Whenever you connect to the Composite Video Input jack (Y/VIDEO), you must
disconnect the Component Video Input jacks (Pb and Pr). If you leave those jacks
connected, it may cause of unstable picture.
Only the left loudspeaker reproduces sound for mono equipment. Use a mono to
stereo adapter (not supplied) for sound reproduction via all internal loudspeakers.
ConnectingtheTVtotheInternetusinganEthernetcable
LAN
Networkprovisioning
equipment
Ethernetcable
Internet
Note
Please purchase shielded Ethernet cables at your local store and use them when you
connect to network equipment.
After connecting an Ethernet cable, set up necessary network settings. Network
p.40
Do not insert any cable other than an Ethernet cable to the Ethernet port to avoid
damaging the unit.
If your telecommunications equipment (modem, etc.) does not have broadband router
functions, connect a broadband router.
If your telecommunications equipment (modem, etc.) has broadband router functions
but there is no vacant port, use a hub.
For a broadband router, use a router which supports 10BASE-T / 100BASE-TX.
Do not connect your PC directly to the Ethernet port of this unit.