Philips 26PFL4907 Flat Panel Television User Manual


 
English
48
The following video signals can be displayed:
Format Resolution Refreshrate
VGA
640
x
480
60Hz
SVGA
800
x
600
XGA
1,024
x
768
WXGA
1,280
x
768
1,360
x
768
Other formats or non-standard signals will not be displayed correctly.
Note
Please purchase the VGA cable or HDMI-DVI conversion cable that has a ferrite core.
The following operations may reduce noise.
Attach a ferrite core to the AC power cord of your PC.
Unplug the AC power cord and use the built-in battery of your PC.
Use an HDMI cable with the HDMI logo (a certied HDMI cable). High Speed HDMI
cable is recommended for the better compatibility.
The unit accepts 480i, 480p, 720p, 1080i and 1080p video signals.
HDMI-DVI connection requires separate Audio connections as well and the Audio
signals are output as Analog (L/R) Audio.
DVI does not display 480i image which is not in compliance with EIA/CEA-861/861B.
USBMemoryStickMemoryStick
This unit offers easy playback of picture (JPEG), music (MP3) and video
(MPEG) les.
Insert the USB Memory Stick into the USB terminal shown below.
USB
p.27
Note
The unit recognizes only a USB Memory Stick.
Do not use a USB hub or an extension cable to connect an external hard disk drive to
the unit. (Not supported.)
A USB Memory Stick is always inserted to this unit directly.
A USB Memory Stick is not supplied with this unit.
We do not guarantee that all USB Memory Sticks can be supported by this unit.
Be sure to keep a backup copy of the original les on your device before you play them
back on this unit. We have no responsibilities for damage or loss of your stored data.
To protect your USB Memory Stick les from being erased place the write protect
sliding tab in the protect position.
When you are ready to remove a USB Memory Stick, set the unit to go into Standby
mode to avoid any damage to your data and the unit.
A USB Memory Stick that requires its own driver or the device with a special system
such as ngerprint recognition are not supported.
This unit is not allowed to use the USB Memory Stick which requires an external
power supply (500mA or more).