Philips 26PFL4907 Flat Panel Television User Manual


  Open as PDF
of 67
 
English
32
Sound
Before you begin:
You must set Home in Location.
➠
p.38
Otherwise, personalized picture and sound settings will not be
memorized after the unit goes into Standby mode.
1 Press MENU/E�IT and use ▲▼◄► to select Setup, then press
OK.
2 Use ▲▼ to select Sound, then press OK.
Picture
Auto sound
Personal
Sound
Equalizer Start now
Features
Balance
Installation
Digital audio language English
Software
SRS TruSurround XT On
AVL
Off
TV speakers
On
Delta volume
3 Use ▲▼◄► to select the item you want to adjust, then press
OK.
The following sound settings can be congured. Depending on the
format of the broadcasting, some sound settings are not available.
Autosound
to select the desired setting
(Personal, Standard, Vivid, Sports, Movie,
Musicand
News)
When you adjust the following settings (Equalizer,
SRSTruSurround�Tand AVL), Personalwill be set
automatically.
Adjust the tonal quality for each frequency.
Equalizer
Cursor◄ Cursor►
to adjust the each level of tonal quality
Press BACK to go back to the previous menu.
Adjust the speakers to suit your listening preference.
Balance
Cursor◄ Cursor►
to adjust the balance of the right and left speakers
DigitalTVoperation
You can select the Audio language while your TV is receiving the Digital
broadcasting.
Digitalaudio
language
to select the language according to your preference.
(It differs depending on the program.)
Analog/CableTVoperation
You can select Main or SAP while your TV is receiving the Analog
broadcasting that has the SAP (Second Audio Program).
(It differs depending on the program.)
Alternateaudio
Main to output main-audio
SAP to output second-audio program
Analog/CableTVoperation
When you set to Main in Alternateaudio above, you can select Mono
or Stereo if the Analog broadcasting is sending the MTS (Multichannel
television sound).
Mono/Stereo
Mono to output mono-audio
Stereo to output stereo-audio
This selects sound modes for more spatial or surround sound
reproduction.
SRSTruSurround
�T
Off
to set SRS TruSurround XT
®
to Off
On
to set SRS TruSurround XT
®
to On
This function keeps a constant loudness differential between the TV
commercials and the programs.
AVL
Off
to remove the auto volume leveling
On
to reduce volume differences between the
TV commercials and the programs
You can select the Audio Output from the unit’s speakers or not. If your
amplier is HDMI link function compatible and connected by an HDMI
cable to this unit, some sound operations such as volume up can be
changed by using this unit’s remote control. Make sure
MasterEasyLink
is set to On.
➠
p.39
TVspeakers
Off
not to output sound from the unit’s
speakers
On
to output sound from the unit’s speakers
Speakers
EasyLink
to control Audio Output from your
connected EasyLink Compliant Devices
with
VOL+/−by using this unit's remote
control.
If a channel or Input device is too loud or too soft, navigate to that
channel or Input device.
Deltavolume
Cursor◄ Cursor►
to set a negative delta
volume level as per your
personal preferences
to set a positive delta
volume level as per your
personal preferences
Note
• Alternateaudio and Mono/Stereo are not available when you watching TV programs
with a cable box or satellite set-top box connected through an HDMI cable or
Component Video cables.
 previous next