Philips 32PFL4507 Flat Panel Television User Manual


  Open as PDF
of 38
 
English
23
Note
• Digitalcaptionservice that you can switch differs depending on the broadcast
description.
• Caption style will not effect if the User setting is set to Off.
• Closed Captioning service may not be controlled by this unit’s menu options if you are
watching television through an external cable or satellite set-top box. In which case
you will need to use the menu options on the external set-top box to control Closed
Captioning.
• The captions do not always use correct spelling and grammar.
• Not all TV programs and product commercials include Closed Caption information.
Refer to your area TV program listings for the TV channels and times of Closed Caption
shows. The captioned programs are usually noted in the TV listings with service marks
such as CC.
• Not all captioning services are used by a TV channel during the transmission of a
Closed Caption program.
• Closed Caption will NOT be displayed when you are using an HDMI connection.
• To show the Closed Caption on your TV screen, broadcast signal must contain the
Closed Caption data.
• Not all TV programs and commercials have the Closed Caption or all types of the
Closed Caption.
• Captions and texts may not exactly match the TV voice.
• Changing channels may delay the Closed Caption for a few seconds.
• Adjusting or muting the volume may delay the Closed Caption for a few seconds.
• Abbreviations, symbols and other grammatical shortcuts may be used in order to keep
pace with the on-screen action. This is not a malfunction.
• The caption or text characters will not be displayed while the main menu or functions
display is shown.
• If a black box appears on the TV screen, this means that the Closed Caption is set to
the text mode. To clear the box, select CC-1, CC-2, CC-3, CC-4 or Off.
• If the unit receives poor quality television signals, the captions may contain errors or
there might be no captions at all. Some possible causes of poor quality signals are:
- Automobile ignition noise
- Electric motor noise
- Weak signal reception
- Multiplex signal reception (ghosts or screen utter)
- Data dropout and Pixelation (for DTV only)
• The unit retains the Closed Caption setting if the power fails.
• When the unit receives special effects playback signal (e.g. Search, Slow and Still) from a
VCR’s video Output channel (ch3 or ch4), the unit may not display the correct caption
or text.
Childandratingslock
You can prevent your children from watching certain programs or
certain channels by locking the TV controls and by using ratings.
1 Use ▲▼ to select Childlock, then press OK.
Picture Caption settings
Sound Child lock
Setup PC settings
Features EasyLink
Language Location Home
USB
E-sticker
--
Software upgrade
2 Use theNUMBERbuttons to enter the 4-digit numbers for your
PIN code.
• When you have not set up your PIN code, enter 0, 0,0,0.
• When the PIN code is correct, Childlock menu is displayed.
See the following description for setting each item.
Picture Channel lock
US movie ratings lock
US TV ratings lock
Canadian English rating
Canadian French rating
Region ratings lock
Change PIN
Sound
Setup
Features
Language
USB
Note
• When you select a rating and set it to or , the higher ratings will be blocked
automatically. The lower ratings will be available for viewing.
• When you set the highest rating to , all ratings turn to automatically.
• To block any inappropriate programs, set your limits in USmovieratingslock,
USTVratingslock and Regionratingslock.
• The child lock setting will be retained after a power failure or after the power is
removed for longer than 10 seconds (except the PIN code reverts to 0000).
Childandratingslock
➠
p.23
• Regionratingslock will be available when the unit receives a Digital broadcast using
the new rating system.
• For the United States, the unit may download the Region Ratings Lock Table, if required.
• The Canadian rating systems on this unit are based on CEA-766-A and CRTC policy.
Channellock
Particular channels or external Input modes can be invisible in this
function.
3 Use ▲▼ to select Channellock, then press OK.
4 Use ▲▼ to select the particular channels or external Input, then
press OK repeatedly to switch between view and block.
• indicates that the channel or Input Source is locked.
• indicates that the channel or Input Source is not locked.
Picture
HDMI1
HDMI2
HDMI3
Video
PC
40.1 DTV
40.2 DTV
Sound
Setup
Features
Language
USB
• The above image is an example for 26 inch and larger screen size
TVs. It may differ depending on what product you purchased.
 previous next