English
25
CanadianEnglishorCanadianFrenchratings
You can select the rating for Canadian English or Canadian French
broadcasting.
3 Use ▲▼ to select CanadianEnglishrating or
CanadianFrenchrating, then press OK.
4 Use ▲▼ to select the desired rating, then press OK repeatedly to
switch between view and block.
• indicates that the rating is locked.
• indicates that the rating is not locked.
Canadian
Englishrating
Canadian
Frenchrating
Description
All
Locked all ratings
E
Exempt program
C −
For all children
C8+ −
For children over 8
G
General audience
− 8ans+
Unsuitable for ages under 8
PG −
Parental guidance suggested
− 13ans+
Unsuitable for ages under 13
14+ −
Unsuitable for ages under 14
− 16ans+
Unsuitable for ages under 16
18+ 18ans+
Adult audience only
Note
• The V-Chip can block non rated programs as per “CEA-608-E sec. L.3”. If the option to
block NR, None or E programs is used in USmovieratingslock, USTVratingslock,
CanadianEnglishrating or CanadianFrenchrating accordingly “unusual results
may occur and the unit may not receive emergency bulletins or other types of
programming:” / Emergency Bulletins (Such as EAS messages, weather warnings
and others) / Locally originated programming / News / Political / Public Service
Announcements / Religious / Sports / Weather.
ChangePIN
Although the default PIN code (0000) is supplied with the unit, you can
set your own PIN code.
3 Use ▲▼ to select ChangePIN, then press OK.
4 PresstheNUMBERbuttons to enter the new 4-digit PIN code.
• Enter PIN code again in ConrmPIN. entry eld.
Picture
Enter PIN.
- - - -
Confirm PIN.
- - - -
Sound
Setup
Features
Language
USB
PINCode Back
Note
• Make sure new PIN code and conrm PIN code must be exactly the same. If they are
different, the space is cleared for reentering.
• Your PIN code will be erased and returns to the default PIN code (0000) when a
power failure occurs.
• If you forget the PIN code, unplug the AC power cord then wait for 10 seconds to plug
the AC power cord in again.
The unit will restore the PIN code to 0000 as the factory default.
PCsettings
This function lets you adjust the PC screen position, clock and phase
during PC Input.
Use ◄► to adjust Clock setting to stabilize the PC screen and Phase
setting to improve the clarity of the PC screen.
1 Use ▲▼ to select PCsettings, then press OK.
Picture Auto adjustment
Sound
Setup Horizontal position 0
Features Vertical position 0
Language Clock 0
USB Phase 0
2 Use ▲▼ to select the item you want to adjust, then press OK.
• The horizontal/vertical position, clock and phase of the PC
screen are automatically adjusted.
Autoadjustment
Select if you want to adjust automatically.
Cursor◄ Cursor►
Horizontalposition
to move PC screen left to move PC screen right
Verticalposition
to move PC screen down to move PC screen up
Clock
to decrease setting value to increase setting value
Phase
Note
• You may not obtain an appropriate screen with Autoadjustment for some signals. In
this case, adjust the settings manually.
•
Adjust Phase setting after Clock setting has been properly adjusted.