Philips 502-1040510 TV Receiver User Manual


  Open as PDF
of 40
 
UsingmoreofyourHDreceiver26
Note
ResettingyourHDreceivertothefactory
defaultsettingserasesallofyourpreferences
andsettings.Forexample,allofyourfavourite
listsandrecordingtimerswillbeerased.
Changing other system settings
From the Settingsmenu,use / to
highlight Set-up
andpress or OK.
TheSet-upmenuappears.
Toturnonoroffthechannelupdates
thatautomaticallyhappenwhenyourHD
receiverisintheactive-standbymode,make
sure Channel installationishighlighted
andpress or OK. Press to highlight
Automatic update
andpress or OK.
Use
/ to highlight On or Off.
Press
or BACK tosaveyourchanges
andreturntothepreviousmenu.
Tocheckthesignalqualityofanychannel
thatyouarereceiving,press to highlight
Signal quality
andpress or OK.
IntheSignal quality testmenuthat
appears,use / toselectachannelthat
youwanttocheck.Press or BACK to
returntothepreviousmenu.
Toturnonoroffpoweringyouractive-
indoor
antennausingtheAntenna IN
connectorontherearpanelofyourHD
receiver,press to highlight Antenna
powering
andpress or OK. Use / to
highlight Off or On.
Press
or BACK tosaveyourchanges
andreturntothepreviousmenu.
YourHDreceiverlocatesthesoftware
availableonyourUSBmemorystickand
displaysaconrmationmessage.Press
the greenbuttontoinstallthesoftware
immediately.Presstheredbuttontocancel
andreturntothepreviousmenu.Ifyou
press the greenbutton,yourHDreceiver
updatesthesoftwareandrestarts.Youmay,
dependingontheupdate,thenberequired
tocompletetherstinstallationsetup(see
page10).
Restoring factory default settings
From the Settingsmenu,use / to
highlight Set-up
andpress or OK.
IntheSet-upmenuthatappears,
use / to highlight Factory resetand
press OK twice.
Amessageappearsaskingyoutoconrm.
Ifyouaresure,pressthegreenbutton,or
press the redbuttontocancelandreturn
tothepreviousmenu.Ifyoupressthe
greenbutton,yourHDreceiverrestores
thefactorydefaultsettingsandrestarts.You
willthenberequiredtocompletetherst
installationsetup(seepage10).
 previous next