Philips 502-1040510 TV Receiver User Manual


  Open as PDF
of 40
 
Gettingstarted12
3.4 What if no channels are found?
IncaseyourHDreceiverdoesnotndany
channels,checkyourconnections(seepages
10and29)andpressthered buttontostart
therstinstallationsetupagain.
IfyourHDreceiverisstillnotabletond
anychannels,presstheyellowbutton.
Use / tomanuallycheckthequality
andstrengthofthesignalsreceivedbyyour
antennainvariouschannelfrequencies.
If the Signal strengthbarisgreen,then
yourantennaandHDreceiverareproperly
connected.Ifitisred,thenyouneedtorst
checkyourconnection.IftheSignal quality
barisgreen,thenyoucanbesurethatyou
arereceivingdigitalbroadcastsignals.If
yourreceptionisnotoptimal(fewchannels
or“blocky”image),youmustcheckyour
antennainstallationasitmayneedtobe
realignedorxed.
OntheCode entry menu,use / or the
number
buttonstoenteryourarea’spostal
code,andthenpressOK to highlight PIN
code.
Note
Enteringyourpostalcodeismandatory.
Youwillnotbeabletocompletetherst
installationsetupwithoutenteringyour
postalcode.
TochangethedefaultPINcode(0000),
press andusethenumberbuttonsto
enteryounewPINcode.Youwillthenbe
promptedtore-enteryourPINcodeto
conrm.
Note
YournewPINcodecanbeany4-digit
numberotherthanthedefaultPINcode
(0000).
Press the greenbuttontoconrmyour
choiceandcompletetheinstallation.
YoucannowstartusingyourHDreceiver.
 previous next