Philips 502-1040510 TV Receiver User Manual


  Open as PDF
of 40
 
UsingmoreofyourHDreceiver24
Default volume
Usethistosetthedefaultvolumeatwake-
upofyourHDreceiver.
Changing parental control settings
From the Settingsmenu,use / to
highlight Parental control
andpress or
OK
.TheParental controlmenuappears.
Tochangetheparentalcontrolseveritysettings,
use / to highlight Parental control limits,
andpress or OK.
Use
/ tohighlighttheseveritylevelyou
wanttoset,andpress or OK tosaveyour
changesandreturntothepreviousmenu.Note
that if you set the Parental control limits to
Off
,thechildtimersandchannellocksettings
(seebelow)willnothaveanyeffect.
Note
WhenParental control limits is set to
ON
,menuitemslikeParental controland
Set-upwillbeprotectedbythePINcode.
Tocreateanewchildtimer,use / to
highlight Child timers
,andpress or OK.
MakesurethatDenechildtimer is
highlightedandpress or OK.
•Audio capabilities on HDMI - Use this
tosettheHDMIaudioformattoPCM
(default)orAuto*.
•Audio capabilities on S/PDIF - Use this
tosettheS/PDIFaudioformattoPCM
(default)orDolby Digital*.Youcanalso
set this to Not connected.
•Easy Link mode - For future use.
•TV format - Use this to set the format
ofthehigh-denitionvideothatisoutput
ontheHDMI connectorofyourHD
receiver.Youcansetthisto16/9 Pillar Box
(default), 16/9 Full Screen or 16/9 Zoom.
Theseoptionsdeterminehowstandard
(4:3)programmesshowonaTVwithaspect
ratioof16:9.Notethatyoucandirectly
changethissettingusingthepicture
format
button onyourremotecontrol.
*TheAutoandDolby Digitalsettingson
HDMIorS/PDIFarenotrecommendeduntil
yourHDreceiverhasbeenupdatedwiththe
appropriate software.
Visitwww.philips.com/supportregularlyto
checkiftherelevantsoftwareupdateisavailable.
Automatic eco mode
Use this to set the time after which your
inactiveHDreceiverautomaticallyenters
intotheactivestandbymode.Youcanset
this to off, 3 hours (default),4 hours,
5 hours, 6 hours
,7 hours or 8 hours.
Return channel
UsethistocongureyourHDreceiverto
connecttotheinternet,whichthenservesas
areturnchanneltoyourDigitalTVservice
provider.Thereturnchannelisnecessarytouse
anyinteractiveapplicationsthatyourDigitalTV
serviceprovidermayoffer.Beforeconguring
thereturnchannel,besuretoconnectyour
HDreceivertoyournetworkrouterusingan
Ethernetcable.ThenchooseeitherDHCP
tosetupyourconnectionautomaticallyor
manuallyenteralltheparameterslikeIP
address
,Network mask,Gatewayand
DNSsettingstomatchyourrouter’ssettings.
 previous next