Filter
Top Products
60
RQT8203
Changing the unit’s settings
Refer to the control reference at the bottom of page 54.
Usually, the unit’s Preset Download or Auto-Setup function (➡ 18, 19) automatically adjusts the clock to correct time. Under some reception
conditions, however, the unit cannot set the clock automatically.
In this case, follow the operation steps below to manually set the clock.
≥In the case of a power failure, the clock setting remains in memory for approximately 60 minutes.
1 While stopped
Press [FUNCTIONS].
2 Press [3, 4] to select “To Others” and press [ENTER].
3 Press [3, 4] to select “SETUP” and press [ENTER].
4 Press [3, 4] to select “Others” and press [1].
5 Press [3, 4] to select “Clock” and press [ENTER].
If a TV station transmits a time setting signal, and when “Automatic”
in the Clock setting menu is set to “On”, the automatic time
correction function checks the time and if necessary it is adjusted
several times every day.
6 Press [3, 4] to select “On” of
“Automatic” and press [ENTER].
Auto clock setting starts.
The following screen appears when setting is complete.
To stop partway
Press [RETURN].
≥If the unit cannot set the clock automatically, set the clock
manually (➡ right, step 6).
6 Press [3, 4] to select “Off” of
“Automatic” and press [ENTER].
7 Press [2, 1] to select the item you
want to change.
The items change as follows:
Hour!#Minute!#Second!#Day!#Month!#Year
^-----------------------------------------------------------------------------------------J
8 Press [3, 4] to change the setting.
You can also use the numbered buttons for setting.
9 Press [ENTER] when you have
finished the settings.
The clock starts.
To return to the previous screen
Press [RETURN].
To exit the screen
Press [RETURN] several times.
Clock settings
Auto Clock Setting
Clock
Automatic
Time Date
15
:
45 :
39
1
. 8
.
2005
On
Automatic clock setting completed.
ENTER: access RETURN: leave
ENTER
RETURN
CHANGE
Manual Clock Setting
Clock
Automatic Off
Time Date
15
:
45 :
39
1
. 8
.
2005
Please set clock manually.
ENTER: store RETURN: leave
0 9
No.
ENTER
RETURN
SELECT
CHANGE
Changing the unit’s settings
60
EH60.book Page 60 Monday, June 27, 2005 8:46 PM