Filter
Top Products
English
CONNECTING YOUR DIGITAL-RECEIVER 15
4.1 Connecting to a TV and VCR both fitted with SCART sockets
Incorporate your receiver in your existing installation as described below.
- Connect the cable from the satellite dish to the “SAT IN” socket of your Digital-Receiver.
- Connect the “TV” SCART socket of your Digital-Receiver to the RGB capable SCART socket of
your TV using the SCART lead supplied with your Digital-Receiver.
- Connect the “VCR” SCART socket of your Digital-Receiver to the “EXT
1/OUTPUT” SCART
socket of your VCR using a SCART lead.
- Plug all your equipment, excluding your Digital-Receiver, into the mains.
Note:
1- This connection also applies to DVD recorders fitted with one or two SCART sockets.
2-
With this connection set up, you can:
- Watch digital TV while you record analogue TV.
-
W
atch analogue
TV while you record digital
TV
.
- Record the digital
TV channel you are w
atching
.
- Watch Play Back from your VCR or DVD.
DSR2011_052005 17/05/05 14:52 Page 15