Filter
Top Products
14
English
Setting Up your DVD/VCR
a will be displayed.
CH TUNING
AUTO
MANUAL
MOVE
a will be displayed.
MANUAL
POSITION P08
CHANNEL 008
DECODER [OFF]
SKIP
[OFF]
● The tuner scans and memorizes all the active
channels in your area.After scanning,the
tuner stops on the lowest memorized chan-
nel.
6 Press the P +/– buttons or numerical key
pads button to scan through channels you
have received.
Automatic Channel Setup
You can programme the tuner to scan only
the channels that you can receive in your
area.
1 Turn on the TV and select the TV channel to
the video channel on the TV.
2 Press the VCR button,then the MENU but-
ton.
3 Press the PLAY B or STOP C button to
select INITIAL,then press the FF g button.
4 Press the PLAY B or STOP C button to
select CH TUNING, then press the FF g
button.
5 Press the PLAY B or STOP C button to
select AUTO,then press the FF g button.
Manual Channel Preset
1 Press the VCR button,then the MENU but-
ton.
2 Press the PLAY B or STOP C button to
select INITIAL,then press the FF g button.
3 Press the PLAY B or STOP C button to
select CH TUNING, then press the FF g
button.
4 Press the PLAY B or STOP C button to
select MANUAL,then press the FF g but-
ton.
5 Press the PLAY B or STOP C button to
select POSITION,then press the FF g but-
ton.
● When a weak signal is received in Manual
Tuning mode, you can change the background
to solid blue or the static screen by pressing
the CLEAR button.
6 Press the PLAY B ,STOP C button or
numerical key pads button to select your
desired position number, then press the FF
g button.
● You can select position number 01-99.
● If you want to remove scrambled signals,
press the PLAY B or STOP C button to
select DECODER.Then,press the FF g
button to select [ON].
7
Press the PLAY B or STOP C button to select
CHANNEL,then press the FF g button.
8 Press the PLAY B or STOP C button.The
DVD/VCR tuner will begin to search up or
down automatically.When a channel is found,
the DVD/VCR will stop searching and the pic-
ture will appear on the TV Screen.
● You can select desired channel number by
using the number buttons.You must refer to
the channel plan and press three digits to
select the channel number.(To select channel
24,first press “0” button then press “2” and
“4”).
● If this is the channel you want,press the FF
g button.
9 Press the MENU button to exit.
Note:
– To confirm that a channel has been
added,press the PROG +/– buttons.