Filter
Top Products
19
English
VCR Operation
Checking or Cancelling Timer
Recording
1 Press the TIMER button.
2 Press the VCR button,then the MENU button.
3 Press the PLAY B or STOP C button to
select TIMER, then press the FF g button.
4 Press the PLAY B or STOP C button to
select programme number,then press the FF
g button.
● The preset timer recording information will
appear on the screen.
5 Press the PLAY B or STOP C button repeat-
edly to review all the programmed timer
recordings.
6 To cancel the timer recording displayed,press
the REW h button.
Note:
– If power fails for more than 30 minutes,
programmed timer recordings will be lost.
TO STOP A TIMER PROGRAMME
WHICH HAS ALREADY STARTED
Press the STOP/EJECT button on the
DVD/VCR.
Hint for Timer Recording
● If there is a power failure or the DVD/VCR is
unplugged for more than 30 minutes,the clock
setting and all timer settings will be lost.
● If a tape ends during TIMER RECORDING,the
DVD/VCR will stop,eject the tape, and switch
to the DVD mode automatically as the TIMER
light blinks.(If the DVD power is off,the
DVD/VCR will become the STANDBY status).
● If a tape is not in the DVD/VCR or does not
have a record tab,the TIMER light flashes and
timer recording will not operate. Please insert
a recordable tape.
● When timer recordings are set,the TIMER
light will come on.To use the DVD/VCR as
usual until the time for the recording, press
the TIMER SET button so that the TIMER light
disappears.Press the DVD/VCR Button to
choose VCR or DVD modes, then continue
with the other features as described in this
manual.
VPS (Video Programme
System)/ PDC (Programme
Delivery Control)
The Video Programme System (VPS) or the
Programme Delivery Control (PDC) is a very
convenient system which assures that the TV
programmes you have programmed for timer
recording,will be recorded exactly from
beginning to end,even if the actual broadcast-
ing time differs from the scheduled time due
to delayed start or extension of the pro-
gramme duration.Also,if a programme is
interrupted and,for example, some special
news is broadcast,the recording will also be
interrupted automatically and resumed when
the programme continues.
When the VPS/PDC signal drop out because
the broadcast signal is weak, or when a
broadcasting station does not transmit a regu-
lar VPS/PDC signal,the timer recording will
be performed in the normal mode (without
VPS/PDC) even if it was programmed for
VPS/PDC.When the starting time of the
VPS/PDC timer recording is from 0:00 to
3:59 on a given day,the VPS/PDC function
operates from 20:00 on the previous day to
4:00 on the following day.When the starting
time of the VPS/PDC timer recording is from
4:00 to 23:59 on the given day,the VPS/PDC
function operates from 0:00 on the day to
4:00 on the following day.This means that if
the relevant programme is broadcasted within
this period,it will be recorded correctly.if in
the timer is not programmed correctly,the
incorrect timer setting stays in effect unless
you cancel it.To cancel the incorrect timer
setting,refer to “Checking or cancelling Timer
Recording’’.