Filter
Top Products
32
English
DVD Setup
Audio Setting
Choose the appropriate Audio settings for
your equipment as it only affect during the
playback of DVD discs of the DVD/VCR.
1 Press the DVD button,then press the SETUP
button during playback is stopped.
2 Press the K or L button to select AUDIO,
then press the OK button.
3 Press the K or L button to choose the below
items and press the OK button repeatedly to
turn the setting ON or OFF.
Dynamic Range Control (DRC):
– To compress the range of sound volume.
Dolby Digital:
– If you connected the DVD/VCR to a
stereo with Dolby Digital compatible.
MPEG:
– If you connected the DVD/VCR to an
MPEG-compatible stereo.
DOWN SAMPLING:
– Press OK,then K or L to select AUTO,
48kHz or 96kHz.Press OK again to confirm
selection.
– Select 96kHz if the disc was recorded in
PCM 96kHz,otherwise select 48kHz.
4 Press the SETUP button to exit.
Display Setting
You can change certain aspects of the DVD/
VCR player’s display screens,on-screen
messages and the display panel on the front of
the DVD/VCR.
1 Press the DVD button,then press the SETUP
button during playback is stopped.
2 Press the K or L button to select DISPLAY,
then press the OK button.
3 Press the K or L button to select the below
items.
TV Aspect:
– Press the K or L button for an item selec-
tion,then press the OK button.
– Select 4:3 LETTER BOX for a black bars
appears on the top and bottom of the screen.
– Select 4:3 PAN & SCAN for a full height
picture with both sides trimmed.
– Select 16:9 WIDE if a wide-screen TV is
connected to the DVD/VCR.
Panel Display:
– Press the K or L button to select BRIGHT,
DIMMER and AUTO,then press the OK but-
ton.
– This adjust the brightness of the display
panel with the factory default BRIGHT.
– When AUTO is selected,the display dims
only during playback.
Angle Icon:
– Press the OK button repeatedly to turn
Angle icon ON or OFF.
– The default setting is ON.
Auto Power Off:
– Press the OK button repeatedly to turn
Auto Power ON or OFF.
– The default setting is ON and it will turn the
DVD/VCR to off automatically after 35
minutes of no use.
Background:
– Press the OK button repeatedly to select
BLUE or GRAY as the background colour for
the on-screen menus.
4 Press the SETUP button to exit.
TruSurround Setting
You can enjoy improved stereo sound when
you play disc in Dolby Digital,PCM 48 kHz or
MPEG Audio.
1 Press the MODE button during playback.
2 Press the OK button repeatedly to select ON
or OFF.
3 The factory default setting is OFF.Select ON
only is you connected the DVD/VCR to a
stereo with Dolby Digital or MPEG decoder.
Note:
– If connection using COAXIAL out,turn
off SRS TruSurround, otherwise there will
be no sound.