Filter
Top Products
English
16
Optional Connections (continued)
DV OUT
Connecting a camcorder to
the front jacks
You can use the front jacks to copy
camcorder recordings. These jacks are
located behind the ap on the right hand
side; it provides convenient connections
for a camcorder.
Option 1: Using DV IN jack
Use this connection if you have a Digital
Video or Digital 8 camcorder. The DV
jack conforms to the i.LINK standard.
It provides the best picture quality.
l Use an i.LINK 4-pin cable (not supplied)
to connect DV IN jack on the DVD
recorder to the appropriate DV OUT
jack on the camcorder.
Before you start operating, press REC
SOURCE on the remote control
repeatedly to select ‘DV’ as the input
channel. For recording, see pages 27-29.
Helpful Hints:
– The DV IN jack does not support a
connection to a Personal Computer.
– It is not possible to record from the DVD
recorder to your camcorder via the DV IN
jack on your DVD recorder.
Option 2: Using VIDEO In jack
You can use VIDEO connection if your
camcorder has only a single video output
(Composite Video,CVBS).
A Connect the VIDEO jack at the front
panel of the DVD recorder to the
corresponding Video output jack on the
camcorder.
B Use an audio cable (red/white ends) to
connect the AUDIO L/R jacks at the
front panel of the DVD recorder to the
audio output jacks on the camcorder.
Before you start operating, press
REC
SOURCE on the remote control
repeatedly to select ‘Front CVBS’ as the
input channel, depending on your
connections. For recording, see pages
27-29.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.