Filter
Top Products
English
31
Recording (continued)
{ Source }
– Use keys to select the recording input
source.
{ Rec Mode }
– Use keys to select your option.
See pages 28 on “Recording settings -
Default Recording Mode”).
{ Mode }
– Use keys to select { Once },
{ Daily }, { Weekly }, { Mon-Fri } (Monday
to Friday, ) { Mon-Sat } (Monday to Saturday)
or { Weekend } (Saturday and Sunday)
recordings.
{ Date }
– Use keys or the numeric keypad
0-9 to enter the date for recording.
{ Start }
– Use keys or the numeric keypad
0-9 to enter the start time of recording.
{ End }
– Use keys or the numeric keypad
0-9 to enter the end time of recording.
E Select
OK
in the menu and press OK.
The system will store the timer entry
and return to the timer schedule list.
l To cancel the above timer setting, select
CANCEL
in the menu and press OK.
F Press TIMER to exit the menu.
G Insert a DVD±R/±RW into the DVD
recorder.
H Press STANDBY-ON to turn off the
DVD recorder.
If the DVD recorder is not in standby
mode, a warning message will appear
three minutes before the recording
starts.
The ‘ TIMER ’ icon will light up on
the display panel if a timer recording is
set.
Helpful Hint:
– Set the timer recording one minute ahead
of the program’s start time. This helps to
ensure the entire program is recorded as
the disc requires about 30 seconds to
prepare for recording.
– The alternation of two timing recorder task
need at least 1 min.
Setting a timer recording from
an external Cable Box/ Satellite
Receiver
If you have a Satellite Receiver/Cable Box
connected to this DVD recorder via the
S-VIDEO (Y/C) or VIDEO (CVBS) (see
page 13), follow the steps described
below to program the recordings.
A Select the channel you want to record at
the Satellite Receiver/Cable Box.
B Program the recording with the required
information. Follow the steps A~H of
“Timer Recording (manually)” on pages
30~31.
{ Source }
– Use keys to select { Rear
S-Video } or { Rear CVBS } as the input
channel and press OK to conrm.
C Leave the Satellite Receiver/Cable Box on
for the recording.
TIPS: Ensure that there is sufcient space available on the DVD±R/±RW before recording.
You have to nalize the DVD±R, before it can be played on other players, see page 36.