Filter
Top Products
English
25
Getting Started (continued)
Modifying Channel Information
You can set a TV channel to your
preference and improve the reception
and the sound quality of the TV channel.
A Press SYSTEM-SETUP
The system menu appears.
B Use keys to highlight
{ System
Setup - Channel Setup } and press
OK.
C Use keys to highlight { Modify
Channel Information } and press OK.
The channel menu appears.
D Use keys to select one of the
options and press OK.
{ Name }
You can use the numeric keypad 0-9
to select the channel preset number
which you wish to change.
– Use keys to change alphabet/
number and use keys to select
different entry elds, then press OK to
conrm.
{ Scan Mode }
Select TV channel search mode based on
channel allocation or frequency.
– Use keys to select { Frequency },
{ S-Channel } (Special Channel) or
{ Channel }, then press OK to conrm.
{ Frequency }
Shows the frequency of the current TV
channel.
– If required, use keys to start the
automatic frequency search and press
OK to conrm.
TIPS: Press to go back to previous menu item.
Press
SYSTEM-SETUP to exit the menu.
{ Sound mode }
Set the TV system that produces the
least distortion of picture and sound.
– Use keys to select a suitable sound
mode, then press OK to conrm.
(See chapter “TV System Guide” at the
back of this manual for more information).
{ Skip }
Select this to set the channel to be
skipped.
The skipped channels can only be
accessed by pressing the corresponding
number button on the remote control.
– Use
keys to choose { Yes } if you
wish to skip this channel, then press OK
to conrm.
{ Fine Tune }
Select this to ne-tune the TV channel
manually if the reception is poor.
– Use keys to adjust the frequency.
E Once complete, select
OK
in the
menu and press OK to conrm and exit
to the previous menu page.
If you do not wish to save any
changes, select
CANCEL
and press OK.
TIPS: By default, PAL D/K is TV System for most parts of China.
Change to PAL I if you are sure your area support PAL I.