Filter
Top Products
English
35
Before Recording (continued)
D Use keys to select the setting you
wish to change and press to access its
options.
Instructions and explanation of the
options are provided in the following
pages.
If the selection in the menu is greyed
out, that means the feature is not
available or not possible to change at the
current state.
E To exit, press SYSTEM.
Record Mode settings chart
Record Mode
HQ
(high quality)
SP
(standard play)
SPP
(standard play plus)
LP
(long play)
EP
(extended play)
SLP
(super long play)
SEP
(super extended play)
1
2
2.
5
3
4
6
8
31
62
78
94
125
157
250
2
4
5
6
8
12
16
Helpful Hint:
– Changing the Recording Mode will clear
the contents in the temporary HDD storage,
only the marked contents (in red bar) will be
recorded onto the hard disk drive (HDD) of
this recorder.
Recordings (underlined options are the factory default settings)
Record mode The recording mode defines the picture quality of recordings and the
maximum recording time on the HDD (hard disk drive), see page 34 on
‘Recording Mode Setting Chart’.
Important! When copying from HDD to a recordable DVD, the
recording mode of the selected recording in the HDD will automatically
be transferred. Selecting another recording mode is not possible.
The factory default setting is SP.
Language Selects the recording language to be used for TV programmes which are
transmitted an additional audio language. For example, if a programme is
available in English and Spanish, with Spanish being the additional language
option.
{ Lang I } – Original broadcast language.
{ Lang II } – Additional audio language.
Auto protect With this feature, the recordings on the HDD will not be automatically
deleted if there is no space for new recordings.
{ On } – Deletes and edits on the recorded titles are not possible.
{ Off } – Turns off the function.
Chapters Automatically divides a recording (title) into chapters by inserting chapter
markers at a specific interval. This enables you to access a specific point in
the recording quickly.
{ Off } – No chapter marker is inserted in the recording.
{ Standard } – Chapter markers are inserted automatically during
recording at approximately five (5) minutes interval.
{ Smart } – This setting is only available for the DV camcorder
recording. A chapter marker is inserted whenever
there is a break in the recording, for example, when
the recording is stopped or paused and restarted again.
SAT record This feature is only available if you have connected a Satellite Receiver or
other devices to the EXT 2 AUX-I/O scart socket of this recorder, see
page 38 for more information.
{ Off } – Turns off the function.
{ EXT2 } – Enables this recorder to start and stop recording when
a signal is received from the connected device.
Direct rec. With this feature, you can immediately record the programme that you
are viewing on the TV by pressing REC button without the needs of
turning on this recorder, see page 38 for more information.
{ On } – Enables recording directly from the TV display.
{ Off } – Turns off the function.
dvdr5350H_EU_Eng537.indd 35 2005-09-16 2:26:00 PM