Filter
Top Products
English
Clock preset The time/date can be set automatically to this recorder if the stored TV
channel transmits time signal.
{ Auto } – The recorder will automatically detect the first
available channel which is transmitting the time/date
information.
{ XXX } – Select the TV channel to use for transmitting
(preset number) the time/date information.
{ Off } – Select this before setting the time/date manually.
If the time/date is incorrect, you must manually set the time/date here.
Time
{ 00 : 00 } – Use keys to set the hours and minutes, press
to move to the next digit field. Once complete,
press OK.
Date
{ 31-01-2005 } – Use keys to set the day, month and year,
press to move to the next digit field. Once
complete, press OK.
System Menu Options (continued)
System settings (underlined options are the factory default settings)
Eco mode This is an energy saving mode.
{ On } – When switching the recorder to standby mode, the
display panel will turn blank to save power.
Note: When this mode is active, automatic SAT
(satellite) recording is not possible.
{ Off } – Clock will display on the recorder’s display panel
when switching off to standby mode.
Second RC
{ On } – Enables control of this recorder with a second
remote control (not supplied).
{
Off } – Disables second RC control function.
OSD
Select the level of On-screen display information.
{
Full } – Complete information is always displayed during
use.
{ Reduced } – The help text and colour button bar will be
removed from the display.
{
Normal } – The help-text will be removed from the menu.
Display Select the brightness of the recorder display panel.
{
Bright } – Normal brightness.
{ Dimmed } – Medium brightness.
{
Off } – Turns off the display.
Jump forward Set the amount of time you want to skip ahead in tuner mode when you
press the
JUMP-FWD button on the remote control, press OK to
confirm the setting. The maximum setting is 60 minutes.
Jump back Set the amount of time you want to skip backwards in tuner mode when
you press the JUMP-BACK button on the remote control, press
OK to
confirm the setting. The maximum setting is 60 minutes.
Version Info This is only an information screen that shows the current version of
firmware installed in your recorder. You may require this information for
future online firmware upgrade.
7776
dvdr5350H_EU_Eng537.indd 76 2005-09-16 2:28:01 PM