Filter
Top Products
English
43
Record to Hard Disk (continued)
TIPS: Set the appropriate recording mode. It determines the actual recordable time to the HDD or a
recordable DVD, see page 38.
Timer recording (ShowView /
VIDEO Plus+ system)
This is a simple timer programming
system. To use it, enter the ShowView
programming number / VIDEO Plus+
PlusCode® programming number
associated with your television
programme. You can nd this number in
your TV listings magazine.
All the information needed by this
recorder for programming is contained in
the programming number.
A Turn on the TV to the correct
programme number for the recorder
(e.g. ‘EXT’, ‘0’, ‘AV’).
B Turn on the recorder and press TIMER
on the remote control.
The GUIDE Plus+ schedule screen
appears.
C Press the Red button on the remote
control for
or .
The ShowView / VIDEO Plus+ entry
screen appears.
= = = = = = = =
Note: In the UK and Ireland the ShowView
system is called VIDEO Plus+ system and
ShowView Programming Number is called
PlusCode Programming Number.
D Use the alphanumeric keypad 0-9 to
enter the ShowView / VIDEO Plus+
programming number and press OK to
con rm. (e.g. 5-312-4 or 5,312 4, key in
‘53124’).
The GUIDE Plus+ system is decrypting
the programming number and
transforming it into a scheduled event.
If an incorrect programming number is
entered, you have to select the correct
programme number manually. Follow the
instructions on the TV to edit the date
and time.
E The default recording settings are
displayed in the pink tile. To make
changes, press the matching colour coded
button on the remote control.
{ Frequency }
Press the Red button on the remote control
repeatedly to select the repeat recording
setting (Once, Weekly, M-F [Monday to
Friday]).
{ Timing }
Press the Green button on the remote
control repeatedly to select adding extra time
(+0, +10, +20, +30) to the end of recording or
select VPS/PDC (V-P) function.
Note: VPS/PDC is not available for external
receiver.
F Press TIMER to con rm and exit the menu.
The ‘TIMER’ icon will light up on the
display panel if a timer recording is set.
If the recorder is not in standby mode,
a noti cation message will appear before
the timer recording begins.
If you ignore the message, the
recorder will automatically switch to the
respective channel and start recording.
dvdr9000h_eu_eng2.indd 43dvdr9000h_eu_eng2.indd 43 2005-10-13 9:18:11 AM2005-10-13 9:18:11 AM