Filter
Top Products
Hookups (cont’d) 11
Connecting to a TV Only
TV has a yellow Video In jack
LR
A
U
D
I
O
V
I
D
E
O
COAXIAL VIDEO Y Pb Pr
MAINS
120V ~ 60HZ
Back of TV
(example only)
LEFT AUDIO IN
VIDEO IN
RIGHT AUDIO IN
3
1
2
LEFT AUDIO IN
VIDEO IN
RIGHT AUDIO IN
1
Connect the Player’s yellow VIDEO Out
jack to the VIDEO IN jack on your TV. Use
the supplied video cable, which has yellow mark-
ings.
2
Connect the supplied audio cable to the
Player’s white/red AUDIO Out (left/right)
jacks and to the left/right AUDIO IN jacks
on the TV. The supplied audio cables have red
and white markings. Match the cable colors to
the jack colors.
3
Connect the supplied power cord to the
MAINS (AC Power) jack on the rear of
the DVD Player.
4
Plug the power cords of the Player and
the TV into an active power outlet. Press
POWER on the Player to turn it on.
5
Turn on the TV. Set it to the correct Video
In channel. See your TV’s manual for details.
Or, go to your lowest TV channel (01 or 02) and
change channels downward until you see the
blue DVD screen on the TV.
• On the TV, the Video In
jack is usually yellow
and might be labeled
video, CVBS, composite,
or baseband.
• If your TV has a single
Audio In jack instead of
separate left/right Audio
In jacks, you will need a
different audio cable.
You need a “splitter”
audio cable to go from
the left/right AUDIO
Out jacks of the DVD
Player to the single
Audio In jack on your
TV. See your electronics
retailer for details.
Helpful Hints