Filter
Top Products
Hookups (cont’d) 13
Connecting to a TV and a two-channel Stereo
(Stereo has Dolby Pro Logic or left/right Audio In jacks)
VIDEO IN
Stereo
(example only)
Back of TV
(example only)
3
VIDEO IN
LEFT AUDIO IN
RIGHT AUDIO IN
LR
A
U
D
I
O
V
I
D
E
O
COAXIAL VIDEO Y Pb Pr
MAINS
120V ~ 60HZ
2
1
1
Connect the supplied video cable to the
Player’s yellow VIDEO Out jack and to the
TV’s VIDEO IN jack. The supplied video
cable has yellow markings.
2
Connect the supplied audio cable to the
white/red left/right AUDIO Out
(left/right) jacks on the Player and to the
left/right AUDIO IN jacks on the Stereo.
The supplied audio cables have red and white
markings. Match cable colors to jack colors.
3
Connect the supplied power cord to the
MAINS (AC Power) jack on the rear of
the Player.
4
Plug the power cords of the Player, Stereo,
and TV into an active power outlet. Press
POWER on the front of the Player to turn
it on.
5
Turn on the Stereo and set it to the cor-
rect Audio In channel or sound source.
Refer to your Stereo’s manual for details.
6
Turn on the TV. Set it to the correct Video
In channel. See your TV owner’s manual for
details. Or, go to your lowest TV channel (01 or
02) and change channels down until you see the
blue DVD screen on the TV.
• To use the Y Pb Pr jacks
for the video connection
instead, see page 12.
Helpful Hint