Filter
Top Products
14 Hookups (cont’d)
Connecting to a TV and a Stereo
(Stereo has Dolby Digital
TM
or MPEG2)
LR
A
U
D
I
O
V
I
D
E
O
COAXIAL VIDEO Y Pb Pr
MAINS
120V ~ 60HZ
VIDEO IN
Back of TV
(example only)
3
2
1
VIDEO IN
Stereo
(example only)
COAXIAL
DIGITAL
AUDIO IN
1
Connect the Player’s COAXIAL Out jack
to the Stereo’s COAXIAL DIGITAL
AUDIO IN jack. Use a coaxial digital audio
cable (not supplied). See your electronics retail-
er for details and availability.
2
Connect the supplied video cable to the
Player’s yellow VIDEO Out jack and to the
TV’s VIDEO IN jack. The supplied video cable
has yellow markings.
3
Connect the supplied power cord to the
MAINS (AC Power) jack on the rear of
the Player.
4
Plug the power cords of the Player, Stereo,
and TV into an active power outlet. Press
POWER to turn on the Player.
5
Turn on the Stereo and set it to the cor-
rect Audio In channel or sound source.
Refer to the Stereo owner’s manual for details.
6
Turn on the TV. Set it to the correct Video
In channel. See your TV owner’s manual for
details. Or, go to your lowest TV channel (01 or
02) and change channels down until you see the
blue DVD screen on the TV.
• Set DIGITAL OUTPUT
correctly. See page 41.
• The Stereo must sup-
port MPEG2 or Dolby
Digital
TM
. Check the
Stereo’s manual to be
sure.
• To use the Y Pb Pr jacks
for the video connection
instead, see page 12.
Helpful Hints