Philips DVP320F/17 DVD Player User Manual


 
Quick Disc Play 15
2
1
Press POWER to turn on the DVD Player.
Turn on your TV. Set it to the correct
Video In channel. You should see the blue
DVD screen on the TV.
2
Press OPEN/CLOSE to release the Disc
compartment lid on top of the Player. Place the
Disc on the Disc hub, with the Disc label fac-
ing up. If the Disc is two-sided, make sure the
label of the side you want to play is facing up.
Press the lid down firmly to close it. Yo u
will hear it click closed.
3
Play may start automatically. If not:
• If you are playing a DVD, a Disc menu may
appear. Press 341 2 to select an item, then
press OK. Or, follow the instructions in the
DVD Disc menu to start play. See page 19.
• To play an Audio CD, press PLAY.
• If a Video CD has Playback Control, press
DISC MENU to access its menu while play is
stopped. Or, press RETURN/TITLE to see the
menu during play. Press the Previous 4,
Next ¢, 3, 4, 1, 2, or Number buttons to
select an item, then press OK. Follow the
instructions of the Video CD. Not all Video CDs
have Playback Control. See the Disc for details.
4
To stop play at any time, press STOP.
If you press STOP once, play will resume at the
same point when you play the Disc later.This
Resume feature applies to the last five Discs.
Press PLAY immediately after inserting the Disc
in the Player (while LOADING shows on the
TV). RESUME PLAY will appear on the TV briefly.
If you press STOP twice to stop play, play will
restart at the beginning of the Disc.
If a Disc is locked, enter
your password or unlock
the Disc. See pages 28-
30.
DVDs have a region code.
This Player will play only
DVDs of Region 1 or ALL.
See page seven.
If there is no activity at
the Player or its remote
for 15 minutes, the Player
will go into low-power
Standby mode. Press
POWER on the Player or
PLAY on the remote to
turn it on again.
Helpful Hints
1
3
4