Filter
Top Products
24
Connect your computer
Daisy chaining
The Active Loop Through facility makes it possible to make a daisy chain.
Connect the monitors (max. 2) before inserting the mains plugs in the
wall sockets.
Connect another VGA cable to the
VGA OUT connector 1 at the back of
the monitor and to the
VGA IN connector of a second VGA monitor.
Note: A/V5 input cannot be used as source to be displayed in daisy chaining.
In case of a Multimedia computer, also connect the audio cables to
AUDIO
OUT R and L 2 next to the VGA OUT connector and to the audio inputs of
the second VGA monitor.
Computer Display modes
VGA 640x480 31.468 kHz 60 Hz
VGA 640x400 31.468 kHz 70 Hz
VGA 640x350 31.468 kHz 70 Hz
VGA 856x480 31.468 kHz 60 Hz
VGA 800x450 31.490 kHz 65 Hz
MAC II 640x480 35.000 kHz 67 Hz
SVGA 800x600 35.156 kHz 56 Hz
SVGA 800x600 37.880 kHz 60 Hz
XGA 1024x768 45.000 kHz 56 Hz
XGA 1024x768 48.360 kHz 60 Hz
When a VGA computer is connected, the selection is made automatically.
A message is displayed when the monitor does not support one of the above
mentioned VGA modes.
Switch your computer to a correct display mode.
VIDEO
IN
AUDIO
IN
VGA IN VGA OUTAUDIO
IN
L
R
L
R
AUDIO
OUT
2 1