Filter
Top Products
22
Connect Peripheral Equipment
If you have a Digital Antenna cable connected to a digital Set-top box, connect
the Set-top box to the
A/V5 HD input.
Connect a Set-top box with Pr, Pb,Y output to the Pr, Pb and Y jacks and to
the
L and R AUDIO jacks on the receiver.
In case of separate horizontal and vertical sync outputs on your set top box,
connect the set top box with these outputs to the H and V jacks on the
receiver.
See also the manual of your High Definition Set-top box.
Warning: in case you notice scrolling images, wrong colours or no colour, no picture, or
even combinations of these, on your screen, check if the connections are done in
the right way. Check if the cable colours match with the input connector colours
High Definition input
Headphone
& Insert the plug into the headphone socket L at the front side of the
receiver.
é Press ¬ to switch off the internal speakers of the TV.
The headphone impedance must be between 8 and 2000 Ohm.
The headphone socket has a 3.5 mm jack.
In the
SOUND menu select Headphone to adjust the headphone volume and
balance and to select the audio source for your headphone sound. See p. 13.
AUDIO
LR
HV
PbY
PrPr
A/V
HD IN
5
LIFT TO OPEN
HEADPHONE