Filter
Top Products
23Connect your computer
& Connect one end of the supplied VGA cable to the video card of the
computer and the other end to the
VGA MONITOR IN 1 connector at the
rear side of the receiver box.
é Fix the connectors firmly with the screws on the plug.
“ In case of a Multimedia computer, connect audio cables to the audio outputs
of your Multimedia computer and to the
AUDIO MONITOR IN R (right) and
L (left) 2 above the VGA MONITOR IN connector at the back of the
receiver.
Note: See the instructions with the monitor in case you want to connect your
computer to the monitor.
Connect your Apple Macintosh* computer
Attention: Macintosh computers with separate H and V synchronisation signals
can be used together with a switchable adaptor. Macintosh computers with
Composite Sync and Sync on Green signals may need another special adaptor or
cable. Contact your dealer.
& Connect the switchable adaptor for Apple video connectors to one end of a
VGA cable.
é Put the DIP switches on the adaptor in the following positions :
1234
off off on on
“ Connect the end of the VGA cable with the adaptor to the video card of the
computer and the other end to the
VGA MONITOR IN connector on the
back of the receiver box.
‘ Screw the connectors down firmly.
To reproduce computer screen information and/or programs, see p. 25.
* Apple Macintosh is a registered trademark of Apple Computer, Inc.
Connect your computer
15-pin D sub
(2-row)
15-pin mini D sub
(3-row)
a
VIDEO
OUT
AUDIO
OUT
OUT
NO FUNCTION
IN
AUDIO
MONITOR
SURR. SOUND
CENTER
IN
AUDIO
MONITOR
VGA
MONITOR
IN
LR
LR
21