Philips 50PP 9202 Projection Television User Manual


 
54
COMPATIBILITY INFORMATION FOR THE TVS HIGH-DEFINITION INPUTS
Appendix A
A
Appendix
The HD INPUT-AV 4 jacks are designed to
accept high-definition signal standards 480p and
1080i as specified by the Electronic Industries
Association. They are compatible with some digi-
tal equipment having RGB outputs with “sync on
green” or RGB with “separate H and V sync.”
As with HD component video signals, output
standards may vary by manufacturer. Refer to the
directions-for-use manual for the receiver before
connecting.
When the Inputs Are Used with Component Video Signals
Y INPUT: 1.0 Vp-p (includes sync), 75 ohms
Pr INPUT: 700m Vp-p, 75 ohms
Pb INPUT: 700m Vp-p, 75 ohms
NOTES:
The Pb INPUT jack can also receive signals from outputs labeled Cb or B-Y.
The Pr INPUT jack can also receive signals from outputs labeled Cr or R-Y.
When the Inputs Are Used with RGB Video Signals
G/Y: 1.0 Vp-p, 75 ohms (compatible with sync on green)
R/Pr: 700 mVp-p, 75 ohms
B/Pb: 700 mVp-p, 75 ohms
H: 3 Vp-p ± 1.0 V, 1 kohm (when using separate H and V sync)
V: 3 Vp-p ± 1.0 V, 1 kohm (when using separate H and V sync).
No industry standards have been estab-
lished for HD television RGB signal sys-
tems, timing, synchronization, and signal
strengths. The HD INPUT-AV 4 RGB
inputs on your Philips TV will not be
compatible with all digital equipment that
offers RGB outputs. If the digital equip-
ment you want to connect offers both
component video and RGB, component
video is the suggested type of connection
to use.
Your TV’s onscreen INSTALL submenu
provides the option of switching the
HD INPUT-AV 4 signal source between
YPbPr and RGB color space settings.
The option is available only when have
selected the AV4 signal source (using the
AV button on the remote or the Source
Select button on the TV). YPbPr is the
default setting. See page 56.
HELPFUL HINTS