Philips 50PP 9202 Projection Television User Manual


 
55
MODEL SPECIFICATIONS
Appendix B
B
A
ppendix
Product Type
Rear-projection HDTV Monitor
Television System
NTSC standard
Channel Coverage
VHF: 213
UHF: 1469
Cable TV: Midband
Superband
Hyperband
Ultraband
Power Source
AC 110V ±10%, 60 Hz
Power Consumption
43PP9202: 255 W (average), standby <1 W
50PP9202: 255 W (average), standby <1 W
60PP9202: 255 W (average), standby <1 W
Audio Power
2 x 10 W, 50 Hz10 kHz at 5% THD (flat response),
8-ohm load
Speaker Type
4 x 6 oval, 15 W
Video/Audio Terminals
INPUT-AV 1
VIDEO (composite): 1 Vp-p, 75 ohms
AUDIO: 500 mVrms, 30 kohm
COMPONENT VIDEO INPUTS (YPbPr)
Y INPUT: 1.0Vp-p (includes sync), 75 ohms
Pb INPUT: 700mVp-p, 75 ohms
Pr INPUT: 700mVp-p, 75 ohms
(The Pb INPUT jack can also receive signals from outputs
labeled Cb or B-Y.The Pr INPUT jack can also receive sig-
nals from outputs labeled Cr or R-Y.)
S-VIDEO INPUT (INPUT-AV 1, INPUT-AV2, side panel [AV3])
Y-INPUT: 1 Vp-p (includes sync), 75 ohms
C-INPUT: 300 mVp-p, 75 ohms
INPUT-AV 2
VIDEO (composite): 1 Vp-p, 75 ohms
AUDIO: 500 mVrms, 30 kohm
HD INPUT-AV 4
Component Video YPrPb/RGB (See page 54.)
AUDIO: 500 mVrms, 30 kohm
VIDEO/AUDIO OUTPUT
VIDEO: 1 Vpp, 75 ohms
AUDIO: Fixed: 500 mVrms into ˙10 kohm
Variable: 02 Vrms into ˙10 kohm
Side Panel (AV3)
VIDEO (composite): 1 Vp-p, 75 ohms
AUDIO: 500 mVrms, 30 kohm
HEADPHONE: 1.5 Vrms, 16 ohm
Picture Visible Area
43PP9202: 1092.2 mm
(43 in.)
50PP9202: 1270 mm
(50 in.)
60PP9202: 1524 mm
(60 in.)
Dimensions
43PP9202: 957.6 mm (W) x 1147 mm (H) x 529.6 mm (D)
(37.7 in. x 45.2 in. x 20.85 in.)
50PP9202: 1132 mm (W) x 1477 mm (H) x 617 mm (D)
(44.6 in. x 58.2 in. x 24.3 in.)
60PP9202: 1337 mm (W) x 1629 mm (H) x 686.8 mm (D)
(52.6 in. x 64.1 in. x 27.0 in.)
Weight (does not include carton)
43PP9202: 63.5 kg (140 lb)
50PP9202: 77.1 kg (170 lb)
60PP9202: 87.1 kg (192 lb)
Supplied Accessories
Remote control with two size AA batteries.
Design and specifications are subject to change without notice.