Filter
Top Products
Timer Recording 41
TUNER ON/OFF
REC/OTR
PLAYSTOP
REVERSE PAUSE SLOW FORWARD
PREVIOUS
EDIT
NEXT
CLEAR
CH
SELECT
TIMER
T/C
ZOOM ANGLE SUBTITLE AUDIO
DIM REPEAT REPEAT SCAN
A/CH
MUTE
9
1,10
VOL
2-8
11
3,5,6
1
Press TIMER on the remote control.
2
Press 89 to select Timer Programming, then press :.
3
Date will be selected. Press 89 to enter the month and date
you want the recording to start, then press :.
Press SELECT repeatedly to choose: the date (timer recording
will occur once on the day you choose); Mo-Fr (timer recording will
occur every weekday at the same time); or a day of the week (for
example, Mo for Monday; timer recording will occur every Monday at
the same time).
4
Ch. (channel) will be selected. Press 89 to enter the channel you
want to record, then press :.
5
Start will be selected. Press 89 to enter the time at which you
want recording to begin - in hours and minutes. Then, press
SELECT repeatedly to choose AM or PM. When the start
time is correct, press :.
6
End will be selected. Press 89 to enter the time at which you
want recording to stop - in hours and minutes. Then, press
SELECT repeatedly to choose AM or PM. When the End
time is correct, press :.
7
Rec Mode (Record Mode) will be selected. Press 89 to choose the
speed at which you want recording to occur. Choose HQ, SP,
LP, or EP.
HQ allows one hour of recording per Disc; SP, two hours; LP, three
hours; and EP, four hours. The slower the speed, the more recording
time per Disc. EP is the slowest speed. The faster the speed, the bet-
ter the picture quality. HQ is the fastest speed. Details are on page 46.
8
Take a minute to check your timer information. If something is incor-
rect, press ;:to choose the incorrect information. Use 89 to
enter the correct data.
9
When the information is correct, press OK. Stored will appear
briefly, then the Timer menu will reappear.
10
Press TIMER to remove the menu.
11
Put a recordable DVD+RW in the Recorder. Press
ON/OFF to turn off the Recorder a few minutes before the
timer recording is set to begin. The Recorder must be off in
order for the timer recording to begin. For the timer recording, the
DVD Recorder will turn itself on, record, then turn itself off when
finished.
• For additional Timer information,
see page 43.
• You can enter the information for
Date, Channel, Start, and End
using the Number buttons. If you
do, the next item will be selected
automatically.
• When using the Number buttons,
enter channel numbers as a three
digit number. For example, for
channel 15, press 0,1,5.
• To stop a timer recording that is
in progress, press ON/OFF on the
remote control to turn off the
Recorder and stop the recording.
• Use HQ when recording from
digital sources, such as a digital
camcorder.
Helpful Hints
Timer
K VCR Plus+ programming
uBTimer Programming B
L
Timer List
To exit
Press TIMER
Timer
Timer Programming
Rec
Date Ch. Start End Mode
10/24 122 09:00AM 09:30AM EP
Mo-Fr/Weekly To store
Press SELECT Press OK