Filter
Top Products
42 VCR Plus+ Timer Recording
A PlusCode is a number of up to eight digits, printed in most TV guides
next to the start time of a TV program. You can program a timer record-
ing quickly by simply entering the code for your program.
Before you begin, complete the VCR Plus+ channel setup. Details are on
page 37.
1
Press TIMER on the remote control.
2
Press 89 to select VCR Plus+ programming, then press :.
3
Press the Number buttons to enter the PlusCode number
from your TV guide, then press OK. Information about the
timer will appear. If information is missing or not available, you may
be asked to enter more information. Follow the instructions given
on the screen.
If you make a mistake, press CLEAR to erase the PlusCode, then
enter it again.
4
If the timer recording information seems complete, press
OK. “Stored” will appear on the screen briefly.
5
Press TIMER to remove the menu.
6
Put a recordable DVD+RW in the Recorder. Press ON/OFF
to turn off the Recorder before the timer recording is set
to begin. The Recorder must be off in order for the timer record-
ing to occur.
TUNER ON/OFF
REC/OTR
PLAYSTOP
REVERSE PAUSE SLOW FORWARD
PREVIOUS
EDIT
NEXT
CLEAR
CH
SELECT
TIMER
T/C
ZOOM ANGLE SUBTITLE AUDIO
DIM REPEAT REPEAT SCAN
A/CH
MUTE
3,4
1, 5
VOL
2
3
6
Timer
K
uBVCR Plus+ programming B
L
Timer Programming
Timer List
To exit
Press TIMER
Timer
VCR Plus+ programming
-- -- -- -- -- -- -- --
Mo-Fr/Weekly To store
Press SELECT Press OK
Timer
VCR Plus+ programming
Rec
Date Ch. Start End Mode
10/24 122 09:00AM 09:30AM SP
AM/PM
Press SELECT Press OK