Filter
Top Products
English
42 RECORDING
Weekend programming
-
not possible
Date was incorrectly entered. Daily programming can
only be used for recordings from Mondays to Fridays.
Memory full
All the timer blocks are in use.
Solution:
l Delete one of the Timer recordings.
Clock not set
-
check Clock channel
The clock is not set. Set it manually (See ‘Time/Date
adjustment-manually’) or adjust the
Clock
channel (See
‘Time/Date adjustment automatic.’)
Data error
Solution:
l Make sure all information is correct and complete.
How to check or alter a Timer Recording
1 Press TIMER on the remote control.
2 Select ‘
Timer list
’ with w/v (down or up cursor.)
3 Press u (right cursor).
4 Select the timer recording you want to check or
alter with w/v (down or up cursor.)
‰ The selected timer recording will be highlighted
in blue.
5 Press u (right cursor).
6 Select what you want to check or alter with t/u
(left or right cursor).
7 Alter data with w/v (down or up cursor) or with
the digit buttons 0-9.
8 Press OK to conform.
9 To end, press TIMER, repeatedly if necessary to
remove the menus.
10 Switch off the Recorder by pressing ON/OFF on
the remote control.
How to clear a timer block
1 Press TIMER on the remote control.
2 Select ‘
Timer list
’ with w/v (down or up cursor.)
3 Press u (right cursor).
4 Select the Timer Recording you want to clear with
w/v (down or up cursor.) The selected Timer
Recording will be highlighted in blue.
5 Press CLEAR.
‰ The Recording you selected will appear alone on
the screen.
6 Confirm with OK.
‰ Timer Cleared will appear at the bottom of the
screen briefly. Then the Timer List will reappear.
7 Remove the menus by pressing TIMER, repeatedly
if necessary.
Note:
If Timer Recordings overlap or conflict with each other, they
will be highlighted in red in the Timer List.
How to stop a Time Recording in progress
l A Timer Recording that is already in progress can
only be aborted by pressing ON/OFF on the
remote control or STANDBY/ON on the front of
the Recorder.
Timer
Timer list
Date
04// 20
07// 20
10// 20
11// 20
120
89
65
120
09: 00 P M
08: 30 P M
07: 00 A M
09: 00 P M
11: 00 P M
09: 30 P M
07: 30 A M
11: 00 P M
SP
SP
SP
SP
CH. Start End
Rec
Mode
Total record time 05: 30
To exit
Press TIMER
To change
Press
Timer
To exit
Press TIMER
Video Plus+ programming
Timer programming
Timer list