Filter
Top Products
English
PLAYBACK 43
Playback
Playing a pre-recorded DVD-
Video disc
Some DVD discs are produced in a way that requires
specific operation or allows only limited operation
during playback. In these cases the Recorder may not
respond to all operating commands. When this occurs,
please refer to the instructions in the disc jacket or case.
When an appears in the top left corner of the TV
screen, the operation is not permitted by the Recorder
or the disc.
1 Insert a pre-recorded DVD-Video disc.
‰ When ‘
Autoresume
’ is ‘
On
’ (see ‘User
Preferences’) playback starts automatically from the
point at which it stopped, the last time the disc
played.
‰ When ‘
Autoresume
’ is ‘
Off
’ the disc will play
from the start of the disc. You can resume play from
the point at which you it stopped the last time by
pressing 2 PLAY shortly. While appears in the
top left corner of the TV screen. When pressing
2 PLAY at beginning of disc playback an “
X
” may
show on the screen
‰ The currently playing title and chapter number
are displayed will appear on the Recorder display.
The elapsed playing time appears also.
Notes:
- Since it is usual DVD movies are released at different times
in different regions of the world, all players have region codes,
and discs can have an optional region code. If you load a disc
that has a different region code, than your Recorder, you will
see the region code notice on the screen. The disc will not
play, and should be unloaded.
- The region code of this Recorder is one (1).
This is stated on a label on the back of your
Recorder.
- Regional coding is not applicable for DVD+RW
discs.
2 The disc may invite you to select an item from a
menu. If the selections are numbered, press the
appropriate numerical button; if not, use the
w/v/u/t (down/up/right/left cursor) buttons to
highlight your selection, then press OK.
Note:
During playback you can display and enter the DVD disc
menu by pressing DISC MENU.
3 To stop play at any time, press 9 STOP.
‰ The default screen will appear, giving information
about the current status of the Recorder.
Playing a (Super) Video CD
1 Insert a (Super) Video CD.
‰ When ‘
Autoresume
’ is ‘
On
’ (see ‘User
Preferences’), playback starts automatically from the
point at which it stopped the last time the disc
played.
‰ The disc may invite you to select an item from a
menu. If the selections are numbered, press the
appropriate numerical button.
2 To stop play at any time, press 9 STOP.
‰ The default screen will appear.
1