Filter
Top Products
13
02Connecting up
Connecting to an AV
receiver
To enjoy multichannel surround sound you need
to connect this player to an AV receiver using a
digital output. This player has coaxial digital jack.
In addition to a digital connection, we recom-
mend also connecting using the stereo analog
connection.
You’ll probably also want to connect a video
output to your AV receiver. You can use any of the
video outputs available on this player (the
illustration shows a standard (composite)
connection).
1 Connect DIGITAL AUDIO OUT jack on this
player to a digital input on your AV
receiver.
AV receiver
DIGITAL IN
(COAXIAL)
This enables you to listen to multichannel
surround sound.
For a coaxial connection, use a coaxial
cable (similar to the supplied video cable) to
connect the DIGITAL AUDIO OUT jack to a
coaxial input on your AV receiver.
2 Connect the analog AUDIO OUT L/R and
VIDEO OUT jacks on this player to a set
of analog audio and video inputs on
your AV receiver.
AV receiver
AUDIO/
VIDEO IN
The diagram shows standard video
connections, but you can alternatively use
the S-video or component video connections
if they’re available.
3 Connect the AV receiver’s video output
to a video input on your TV.
• You usually have to connect the same kind
of video cable between your DVD player and
AV receiver, and between your AV receiver
and TV.
• If you don’t mind mono sound, you can buy
a stereo RCA-to-mono RCA cable from an
electronics store. Connect the stereo end to
this player and the mono end to your TV.