Filter
Top Products
51
10Barcode Stack / Command Stack
Direct setting using a barcode
reader
1 Use the barcode reader to input the
barcodes.
2 Transmit to player.
[Example 1]
Read in and transmit to player: “PLAY.”
[Example 2]
Read in and transmit to player: “Playback
chapters 5 – 12 of title 8 as subtitle 3, audio 2,
angle 1.”
• Attempting to use the remote control or
player control buttons while performing
barcode operations can cause the player to
malfunction.
• When barcodes are used to operate the
player, On Screen Displays (OSD: operation
indicators such as [Play] and [Stop]) do not
appear.
• Commands other than DVD barcodes are
ignored.
Using the remote control unit to
make settings
The remote control unit can be used to set the
five operating commands PLAY, PAUSE, STEP
FWD/REV, and STOP, as well as WAIT and GO
TO GROUP.
Other related commands available through the
remote control include Chapter Search, Chapter
Play, Frame Search, and Frame Segment Play.*
* Frame Segment Play plays back a desired frame internval.
Example 1: “PLAY”
1 Press ENTER in the command input area.
2
Use the / (cursor up/down) buttons
to select “COMMAND” then press ENTER.
Group
001
SEGMENT PLAY
CHAPTER PLAY
COMMAND
001
002
003
004
005
006
007
008
Command Stack
Group
(1-001)
Command
(0-000)
Move Select ENTER
RETURN
Return Exit
HOME MENU
3 Use the /// (cursor up/down/
left/right) buttons to select “PLAY” then
press ENTER.
Group
001
PLAY PAUSE
STEP REV
WAIT
REPEAT GROUP
GO TO GROUP
DIVIDE GROUP
MERGE GROUP
STOP
STEP FWD
000
sec.
000
001
002
003
004
005
006
007
008
Command Stack
Group
(1-001)
Command
(0-000)
Move Select ENTER
RETURN
Return Exit
HOME MENU